TOPIC
Integrated microfluidic valves for Lab-on-chip application
First developed in 1970s, Lab-On-Chip (LOC) devices have gained both academical and commercial interests. With multiple laboratory functions integrated on a single chip, LOC has provided a promising way to reshape the global health system by supplying cheap and reliable medical diagnosis apparatus whenever and wherever they are needed.However, compared to fast-developing CMOS industry where memory and logic components are scaled towards smaller and smaller dimensions, few progresses have been made in scaling medical diagnosis devices into portable manners. One of the main obstacles is that current techniques for fluid pumping, isolation and analysis require components based on different physics, made on different platforms and packaged in different formats. This research aims to address one of the above challenges – fluid isolation – by developing an integrated and efficient microvalve on Imec’s microfluidic platform. The developed microvalve should be leakage tight and have fast switching speed. It needs to be compatible with rest parts of the system and should show its upscaling potential for mass production.This multidisciplinary topic tackles different aspects and includes the following steps: literature study to obtain a state-of-the-art overview of the field, material screening, device fabrication and characterization. During the project the student will interact with different experts from fields in electronics, biology and materials. Hands-on cleanroom experience and simulations (COMSOL Multiphysics®/ANSYS®) knowledge can be expected. In the end, the student should give a presentation and write a report/thesis. Depending on the results a journal publication should be prepared.
Type of project: Internship, Thesis, Combination of internship and thesis
Duration: > 6 months
Required degree: Master of Engineering Technology, Master of Science, Master of Engineering Science
Required background: Materials Engineering, Mechanical Engineering, Nanoscience & Nanotechnology
Supervising scientist(s): For further information or for application, please contact: Boshen Liang (
Boshen.Liang@imec.be) and David Cheyns (
David.Cheyns@imec.be)
Imec allowance will be provided
O Κινέζος ψάχνει για πρακτικάριο που να ξέρει τεχνολογία υλικών κυρίως πολυμερή υλικά και γυαλί για εφαρμογές mems ιατρικού περιεχομένου (μελετάνε αίμα και τέτοια). Θα δουλεύει σε clean room κυρίως ο πρακτικάριος και πρέπει να έχει background από μηχανολόγους μηχανικούς για ότι χρειάζεται ένα τέτοιο σύστημα. Πρέπει να ξέρει κανείς βασικά μηχανικής στερεών και ρευστών.
Ελπίζω να έγινα κατανοητός.
Ο Κινέζος είναι πολύ κομπλέ άτομο και φιλότιμο. Είναι παντρεμένος δεν ψάχνει για συντροφο!
ΑΝ ΞΕΡΕΤΕ ΚΑΠΟΙΟΝ ΠΟΥ ΝΑ ΕΧΕΙ ΚΑΠΟΙΟ BACKGROUND ΑΚΟΜΑ ΚΑΙ ΜΕ ΜΗΧΑΝΟΛΟΓΟΥΣ ΠΕΙΤΕ ΤΟΝ Ή ΚΑΙ ΑΠΟ ΤΟ ΦΥΣΙΚΟ Ή και από αλλού! Πρακτικάριος θα πει οτι μπορει να κάνει και τη διπλωματική του εργασία εκεί!
Τα φράγκα από όσο ξέρω στο περίπου είναι 900 ευρώ! Μπορείται να βρείτε σπίτι με 400-500 ευρώ όλα μέσα και να ζήσετε με φαί με ακόμα 300 (πλας φαί στο imec σε αυτά)! Παίζει να παίρνετε και κάρτα λεωφορείου με 20 ευρώ το χρόνο. Και αν είστε και κάτω από 26 και για τρένα. Αλλά για αυτά τα δύο δεν είμαι σίγουρος. Τρώτε στο imec, αλλά βγαίνει 120-150 ευρώ το μήνα και δεν είναι λίγα. Εκτός κι αν τσιμπάτε σαντουιτσάκι με 2 ευρώ που μπορεί να έχει ακόμα και αυγά μέσα. Έχει βέβαια ποδηλατάκι μεταχειρισμένο με κάτω από 10 ευρώ το μήνα για ένα ολόκληρο εξάμηνο και πάτε παντού μιας και οι αποστάσεις στην πόλη είναι μικρές. Γενικά θα είστε τσίμα τσίμα αλλά θα την παλέψετε πιστεύω! Μπορώ να ρωτήσω πρακτικάριους πως την βγάζουν.
Στην πόλη μιλάνε κανονικά αγγλικά και είναι φιλικοί όχι σαν τους ξενερωτους τους ολλανδούς ή τους περισσότερους φλαμανδούς!
LINK:
http://www.imec-int.com/en/work-at-imec/job-opportunities/integrated-microfluidic-valves-for-lab-on-chip-applicaiton